Our Products

Manufactured to the same exacting standards as SMARTPLY MAX but with the addition of tongue and grooved edges. Ideal for numerous load bearing applications such as roofing and flooring. SMARTPLY MAX T&G along with all other SMARTPLY products carries the FSC® certification conformity assessed (CE, UKCA) to EN 13986:2004+A1:2015

• FSC® Certified
• Moisture Resistant
• Sustainable
• Tongue & Groove Edge Profile
• No added formaldehyde

OSB is usually composed of three layers, with the strands of the outer two layers orientated in a particular direction, more often than not in the long direction of the panel. It is used extensively for the roof, wall, and floor sheathing in residential and commercial construction.

SMARTPLY MAX is a strong, versatile board suitable for structural use in humid conditions (service Class 1 and 2), ideal for applications as diverse as roofing, flooring and wall sheathing etc. SMARTPLY MAX is a moisture resistant loadbearing panel designed for use in humid conditions and is therefore ideal for many structural and non-structural applications in both internal and protected external environments. Manufactured in accordance with BS EN 300:2006, it is the perfect choice for roofing, flooring, wall sheathing and many other applications where strength and moisture resistance are paramount.

• FSC® Certified
• Durable
• Versatile
• Sustainable
• No added formaldehyde

All our Scaffold Boards are compliant to BS 2482:2009. Manufacturing process is regularly audited by CATG (UKAS Accredited) to ensure continued and consistent application of British Standards.

• Available in 3.9m length as standard. Other lengths available on special order
• Visually graded to BS 2482:2009
• End Banded
• Manufacturing process is regularly audited by CATG (UKAS Accredited) to ensure continued and consistent application of British Standards.
• Supported at 1.2m spans

• Available in 2.4m lengths
• All supplied from either FSC® or PEFC fully certified or controlled resources.
• High pressure Tanalith E preservative treated to use class relevant to the product type, as in accordance with recommendations given in BS 8417:2011+A1:2014.
• Standard 60 year service life certification, against insect attack and wood rotting fungi (when used correctly and installed above dpc level in buildings).
• Produced from imported spruce (Whitewood) Abies Alba/Picea abies – WPCA or pine and (Redwood) Pinus sylvestris – PNSY or combined.

It advised to check NFRC technical guidance notes on fixing cedar shingles and, if treatment is advised, this tends to be calculated on the geographical location of which the product is to be fixed. Good practice is also to follow specifications and fixers’ advice. Recommended roofing battens SRT GOLD® Roofing Batten BS 5534:2014+A2:2018. Recommended fixings are stainless steel 31mm x 1.8mm annular ring nails.

• 400mm long, random widths 75mm – 350mm
• Cedar is naturally insect and rot resistant requiring no further treatment and sourced from sustainable forests in Western Canada.
• Backed by The Cedar Shake and Shingle Bureau.
• After weathering they will adopt a silvery grey shade.

• Available in various lengths ranging from 2.4m – 6.0m, in 600mm increments
• All supplied from either FSC® or PEFC fully certified or controlled resources.
• High pressure Tanalith E preservative treated to use class relevant to the product type, as in accordance with recommendations given in BS 8417:2011+A1:2014.
• Standard 60 year service life certification, against insect attack and wood rotting fungi (when used correctly and installed above dpc level in buildings).
• Produced from imported spruce (Whitewood) Abies Alba/Picea abies – WPCA or pine and (Redwood) Pinus sylvestris – PNSY or combined.
• Carcassing is mostly supplied machined, which means consistent sizes and reduced splinters for the safety of construction workers. This is also why edges are ‘eased’.

• Available in 2.4m lengths
• All supplied from either FSC® or PEFC fully certified or controlled resources.
• High pressure Tanalith E preservative treated to use class relevant to the product type, as in accordance with recommendations given in BS 8417:2011+A1:2014.
• Standard 60 year service life certification, against insect attack and wood rotting fungi (when used correctly and installed above dpc level in buildings).
• Produced from imported spruce (Whitewood) Abies Alba/Picea abies – WPCA or pine and (Redwood) Pinus sylvestris – PNSY or combined.

When battens are cut on site, those cut ends are exposed to the elements and need to be treated to comply with British Standard BS 5534, Batten Shield has been developed specifically for this purpose. Batten Shield is a water-based cream that makes battens water-repellent, protecting cut ends from moisture and rot. Wood pores remain open allowing the wood to breath for optimal moisture-regulation. The non-drip cream structure makes Batten Shield easy to apply and can be used with all types of graded batten.

• Makes batten cut ends compliant with BS 5534
• Non-drip cream structure
• 0% VOC (Volatile Organic Compounds)
• Non-film-forming (Does not flake off)
• Prevents water damage
• Reduces the risk of micro-organism growth & frost damage

• Available in various lengths ranging from 3.0m – 5.4m, in 300mm increments
• All supplied from either FSC® or PEFC fully certified or controlled resources.
• High pressure Tanalith E preservative treated to use class relevant to the product type, as in accordance with recommendations given in BS 8417:2011+A1:2014.
• Standard 60 year service life certification, against insect attack and wood rotting fungi (when used correctly and installed above dpc level in buildings).
• Produced from imported spruce (Whitewood) Abies Alba/Picea abies – WPCA or pine and (Redwood) Pinus sylvestris – PNSY or combined.
• Not suitable for BS 5534 applications

• Available in 3.6m lengths
• All supplied from either FSC® or PEFC fully certified or controlled resources.
• High pressure Tanalith E preservative treated to use class relevant to the product type, as in accordance with recommendations given in BS 8417:2011+A1:2014.
• Standard 60 year service life certification, against insect attack and wood rotting fungi (when used correctly and installed above dpc level in buildings).
• Produced from imported spruce (Whitewood) Abies Alba/Picea abies – WPCA or pine and (Redwood) Pinus sylvestris – PNSY or combined.

• Available in 3.0m, 3.6m and 4.8m lengths
• All supplied from either FSC® or PEFC fully certified or controlled resources.
• High pressure Tanalith E preservative treated to use class relevant to the product type, as in accordance with recommendations given in BS 8417:2011+A1:2014.
• Standard 60 year service life certification, against insect attack and wood rotting fungi (when used correctly and installed above dpc level in buildings).
• Produced from imported spruce (Whitewood) Abies Alba/Picea abies – WPCA or pine and (Redwood) Pinus sylvestris – PNSY or combined.

• Available in various lengths ranging from 2.4m – 6.0m, in 600mm increments
• All supplied from either FSC® or PEFC fully certified or controlled resources.
• High pressure Tanalith E preservative treated to use class relevant to the product type, as in accordance with recommendations given in BS 8417:2011+A1:2014.
• Produced from imported spruce (Whitewood) Abies Alba/Picea abies – WPCA or pine and (Redwood) Pinus sylvestris – PNSY or combined.

• Available in various lengths including 2.1m, 2.4m, 3.0m, 4.8m
• All supplied from either FSC® or PEFC fully certified or controlled resources.
• High pressure Tanalith E preservative treated to use class relevant to the product type, as in accordance with recommendations given in BS 8417:2011+A1:2014.
• Standard 60 year service life certification, against insect attack and wood rotting fungi (when used correctly and installed above dpc level in buildings).
• Produced from imported spruce (Whitewood) Abies Alba/Picea abies – WPCA or pine and (Redwood) Pinus sylvestris – PNSY or combined.

• Available in various lengths including 2.1m, 2.4m, 3.0m, 4.8m
• All supplied from either FSC® or PEFC fully certified or controlled resources.
• High pressure Tanalith E preservative treated to use class relevant to the product type, as in accordance with recommendations given in BS 8417:2011+A1:2014.
• Standard 60 year service life certification, against insect attack and wood rotting fungi (when used correctly and installed above dpc level in buildings).
• Produced from imported spruce (Whitewood) Abies Alba/Picea abies – WPCA or pine and (Redwood) Pinus sylvestris – PNSY or combined.